HIKOKI UB 18DG Instrucciones De Manejo página 9

Unlock
Warning
V volts
A amperes
Hz hertz
W watts
IPXX IP symbol
Be sure to open the legs before
extending the pole.
Be careful not to pinch your hands
or fi ngers in the sliding parts during
operation.
APPLICATIONS
Illumination of work site
SPECIFICATIONS
Model
Voltage
LED (white)
Brightness adjustment
range
Max
(4000 lm)
Operating
High
time,
(3000 lm)
approx.
(Using full
Mid
charged
(2000 lm)
battery)*
Low
(1000 lm)
Extended
Exterior
dimensions
Retracted
Weight
Max on mode power
CRI (Color rendering
index)
CCT (Correlated color
temperature)
NOTE
This product contains a light source of energy effi ciency
class <E> defi ned by EU 2019/2015.
UB18DG
18 V
×66
1000 lm, 2000 lm, 3000 lm,
4000 lm
3.0 Ah: 1.5 hours
5.0 Ah: 2.5 hours
8.0 Ah: 4.0 hours
3.0 Ah: 2.1 hours
5.0 Ah: 3.5 hours
8.0 Ah: 5.6 hours
3.0 Ah: 3.3 hours
5.0 Ah: 5.5 hours
8.0 Ah: 8.8 hours
3.0 Ah: 6.3 hours
5.0 Ah: 10.5 hours
8.0 Ah: 16.8 hours
H 2150 mm × L 630 mm ×
W 720 mm
H 1035 mm × L 222 mm ×
W 210 mm
8.1 kg
(without battery and LED driver)
32 W
> 80
5000 K
* The operating times shown are reference values only.
The actual time varies depending on the charging
state of the battery, the usage conditions, etc. For the
BSL36A18, refer to the 5.0 Ah fi gures; for the BSL36B18,
refer to the 8.0 Ah fi gures.
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 151.
Standard accessories are subject to change without notice.
CHARGING
Before using the tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1- second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 4.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot lamp
will blink in red. (At 1-second intervals) (See Table 1)
● Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery.
Indications of the pilot lamp (RED)
Lights on for
0.5 seconds and off
Before
for 0.5 seconds
charging
(Blinks)
Lights continuously
While
(Lights)
charging
Lights on for
0.5 seconds and off
Charging
for 0.5 seconds
complete
(Blinks)
Lights on for
1 second and off for
Overheat
0.5 seconds
standby
(Blinks)
Lights on for
0.1 seconds and off
Charging
for 0.1 seconds
impossible
(Flickers)
9
English
Table 1
Plugged into power
source
—
—
Battery overheated.
Unable to charge.
(Charging will
commence when
battery cools)
Malfunction in
the battery or the
charger