Alpina PTC-2021 WIFI GLASS Manual De Instrucciones página 7

Operation
The voltage of the power source must comply with the specifications
on the ratings plate of the heater. Devices marked with 230 V can also
be operated at 220 V. Before using the appliance, it is imperative to
ensure that the installation location corresponds to the requirements of
the safety instructions.
Note: When the heater is turned on for the first time, a harmless
slight odour may occur. This odour is produced by the internal heating
elements as they heat up. Provide suffcient ventilation.
Note: Your heater is fitted with a safety device that will switch the
appliance off overheating occurs. lf the heater stops working, turn it
off and inspect the inlets and outlets tor blockages. Unplug the heater
and wait at least 10 minutes for the protection system to reset before
attempting to restart the appliance. lf the safety device still switches
the heater off and prevents it from operating, take the heater to your
nearest service centre for inspection and repair.
Attention:
1. Check that the air intake and exhaust is not covered or obstructed
in anyway.
2. Keep combustible objects at least 1m away from the unit. Plug the
unit to a grounded power socket.
Note:
1. This product must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock.
2. This unit comes standard with a 1.5m long cord. Always plug the
unit into a wall outlet. An extension or relocate tab should never be
used.