HIKOKI D 36DYA Instrucciones De Manejo página 9

D36DYA: Cordless Angle Drill
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools that
have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
Direct current
V
Rated voltage
n
0
No-load speed
Ls Low speed
Hs High speed
Wood
Metal
Twist bit
Auger bit
Self-feed bit
Hole saw
Drill chuck capacity
Weight * 1
kg
(According to EPTA-Procedure 01/2014)
Switching ON
0
Switching OFF
Disconnect the battery
2
Change rotation speed – High speed
1
Change rotation speed – Low speed
Clockwise rotation
Counterclockwise rotation
Warning
*1 Depending on attached battery. The heaviest weight is
measured with BSL36B18 (sold separately).
Battery
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains
the accessories listed on page 210.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Drilling holes in narrow spaces through which pipes
such as water pipes, gas pipes, and electrical conduits
are passed
○ Drilling large-diameter holes in wood
○ Drilling holes in metal
SPECIFICATIONS
1. Power tool
The specifications of this machine are listed in the
Table on page 210.
Existing batteries (BSL3660/3620/3626, BSL18 and
BSL14 series) cannot be used with this tool. Use a multi
volt type battery.
NOTE
Due to HiKOKI's continuing program of research and
development, the specifications herein are subject to
change without prior notice.
2. Battery (sold separately)
Model
BSL36B18
*1 The tool itself will automatically switch over.
9
English
Voltage Battery capacity
36 / 18 V * 1 4.0 / 8.0 Ah * 1