Publicidad
Idiomas disponibles
Idiomas disponibles
FINAL INSTALLATION INSTRUCTIONS
5. Reconnect the motor power connector (I) from the motor
assembly (B) to the fan female receptacle in the housing
(A).
6. Plug the wire connector from the light kit pan (F) into the
light male receptacle in the housing (A).
7. Position the light kit pan (F) on the housing (A), aligning
the two holes on the light kit pan (F) with the threaded
rods on the mounting bracket (C). Install two mounting
bracket nuts (EE) and washers (FF) on the threaded
8
rods and tighten until the light kit pan (F) is flush with the
finished ceiling.
Hardware Used
0
Mounting Bracket Nut
x2
0
0
Washer
x2
18
I
tl )
~UTILITECH"
J
Lowes
.com
~
- · -
Publicidad
