Specifications
Fiche technique
I
I
Tuner section
Frequency range, antenna —
FM:
87.5 -108.0 MHz Rod antenna,
AM: 530-1,710
kHz Ferrite bar antenna
Deck section
Track format — 4 tracks, 2 channels/ Frequency range — Normal tape: ~
50-12,500
Hz (EIAJ) / Recording system — AC bias/ Erasing system
— Magnet erase/ Heads — Recording/playback head (1), Erasure
head (1)
CD player section
Disc — Compact disc/ Scanning method — Non-contact optical
scanner (semiconductor laser)
General
Speaker — Front: 80 mm cone type (2), Rear: 80 mm cone type (2)/
Output — Headphones jack (stereo mini-jack) / Power output — 2.5 W
+ 2.5 W (EIAJ 7 ohms, T.H. D. 10%) / Power requirements — DC 12 V
using eight size C (RI 4) batteries, AC 120 V, 60 Hz / Power
consumption — 12 W / Dimensions — 410 (W) x 191.5 (H) x 132,1 (D)
mm (161/4 x 75/6 x 51/4 in.) / Weight — 3.3 kg (7 Ibs. 4 oz.) (excluding
batteries)
. Specifications and external appearance are subject to change
without notice.
. Specifications, trade mark and model name are marked on the
bottom of the unit.
COPYRIGHT
Please check the copyright laws relating to recordings from disc,
radio or external tape for the country in which the machine is being
used.
Especificaciones
Seccion del sintonizador
Gama de frecuencias, antena — FM: 87,5 – 108,0 MHz Antena
telescopic
AM: 530 – 1,710 kHz Antena de barra de ferrita
Seccion de la grabadora de casetes
Formato de pistas — 4 pistas, 2 canales / Gama de frecuencias —
Cinta normal: 50 – 12.500 Hz (EIAJ) / Sistema de grabacion —
Polarization de CA / Sistema de borrado — Borrado magnetico /
Cabezas — Cabeza de grabacion/reproduction
(1), Cabeza de borrado
(1)
Seccion del reproductor de discos compactos
Disco — Disco compacto / Metodo de exploration — Explorador
optico sin contacto (laser de semiconductor)
Generales
Altavoces — Delantero: tipo cono de 80 mm (2), Trasero: tipo cono de
80 mm (2)/ Salida — Toma para auriculares (minitoma estereo) /
Salida de potencia — 2,5 W + 2,5 W (EIAJ, 7 ohmios, 10% de
distortion armonica total) / Alimentacion — 12 V CC utilizando echo
pilas de tamafio C (R14), 120 V CA, 60 Hz/ Consumo — 12 W /
Dimensioned — 410 (An) x 191,5 (Al) x 132,1 (Prf) mm/ Peso — 3,3
kg (excluyendo Ias pilas)
. Las especificaciones y el aspecto externo estan sujetos a cambio sin
previo aviso,
o Las es~ecificaciones, la marca comercial, v el nombre del modelo,
estan rnarcados en la parfe inferior de la u;idad.
DERECHOS DE AUTOR
Compruebe Ias Ieyes sobre derechos de autor en relation con Ias
grabaciones de la radio, disco o cinta externa del pafs donde vaya
a utilizarse el aparato.
AIWA CO.,LTD.
Partie tuner
Gamme de frequencies, antenne — FM: 87,5 -108,0
MHz. Antenne
tige. AM: 530-1.710
kHz. Antenne barre de ferrite.
Partie cassette
Format piste — 4 pistes, 2 voies / Gamme de frequencies — Bandes
normales: 50-12.500
Hz (EIAJ) / Systeme d'enregistrement —
Polarisation par courant alternatif / Systeme d'effacement —
Effacement magnetique / T6tes — (1) t6te d'enregistrementllecture,
(1) t&e d'effacement
Partie Iecteur de CD
Disque — Disque compact/ Methode de lecture — Scanner optique
saris contact (rayon laser a semiconducteur)
Generalities
Haut-parleur — Avant: type en c6ne 80 mm (2), Arriere: type en c6ne
80 mm (2) / Sorties — Prise casque (mini-jack st6r60) / Puissance —
2,5 W + 2,5 W (EIAJ 7 ohms, Coefficient de DHT 10
Y.) /
Conditions
d'alimentation — 12 V cc avec huit piles taille C (R14), 120 V ca, 60
Hz/ Puissance absorbee — 12 W / Dimensions — 410 (1)x 191,5 (h)
x 132,1 (p) mm / Poids — 3,3 kg (saris Ies piles)
. Les caracterisques et Ies Iignes ext6rieures sent sujettes a
modification saris preavis.
. Les caracteristiques, la marque de fabrique et Ie nom du modble
sent indiques au bas de I'appareil.
COPYRIGHT
Bien verifier Ies Iois relative aux droits d'auteurs pour Ies
enregistrements depuis des disques la radio ou des cassettes
enregistrees clans Ie pays ou cet appareil est utilise.
NOTE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference
in a residential installation.
This equipment
generates,
uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference
will not
occur
in a
particular installation.
If this equipment does cause harmful interfer-
ence to radio or television
reception, which can be determined
by
turning the equipment
off and on, the user is encouraged
to try to
correct the interference
by one or more of the following measures:
.
Reorient or relocate the receiving antenna.
Increase the separation
between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced
radio/TV technician
for
help.
CAUTION
Modifications
or adjustments to this product, which are not expressly
approved by the manufacturer,
may void the user's right or authority
to operate this product.
Printed in Hong Kong
44-0319-1