Descargar Imprimir esta página

GE JB850 - 30 Manual De Instrucciones página 24

Publicidad

Idiomas disponibles

Idiomas disponibles

Q
0
C
C
Q
C
Z
Z
m
Z
Z
LLI
C.D
Maintenance
WARNING
SHOCK OR BURN HAZARD:
Before replacing oven light bulb, disconnect the electrical
power to the range at the main fuse or circuit breaker panel. Failure to do so may result
in electric shock or burn.
iA CAUTION
BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot
glass with bare hands or a damp cloth can cause burns.
Oven Light
Replacement
To remove:
1. Turn the glass cover counterclockwise
1/4 turn until
the tabs of the glass cover clear the grooves of the
socket. Wearing latex gloves may offer a better grip.
2. Using gloves or a dry cloth, remove the bulb by
pulling it straight out.
To replace:
1. Use a new 120/130-volt halogen bulb, not to exceed
50 watts. Replace the bulb with the same type of bulb
that was removed. Be sure the replacement bulb is
rated 120 volts or 130 volts (NOT 12 volts).
2. Using gloves or a dry cloth, remove the bulb from its
packaging. Do not touch the bulb with bare fingers.
Oil from skin will damage the bulb and shorten its life.
3. Push the bulb straight into the receptacle all the way.
4. Place the tabs of the glass cover into the grooves of
the socket. Turn the glass cover clockwise 1/4 turn.
For improved lighting inside the oven, clean the glass
cover frequently using a wet cloth. This should be
done when the oven is completely cool.
5. Reconnect electrical power to the oven.
Receptacle
Socket
i
i
i
i
i
i
_-"_'_
G9 Bulb
i
i
i
i
i
i
Tab
Glass cover
(on some models)
Receptacle
Use
gloves or
cloth
Oven Light
Replacement
To remove:
1. Turn the glass cover counterclockwise
1/4 turn until
the tabs of the glass cover clear the grooves of the
socket. Wearing latex gloves may offer a better grip.
2. Remove the bulb by turning it counter-clockwise.
To replace:
1. Replace bulb with a new 40-watt appliance bulb.
Insert the bulb and turn it clockwise until it is tight.
2. Place the tabs of the glass cover into the grooves of
the socket. Turn the glass cover clockwise 1/4 turn.
For improved lighting inside the oven, clean the glass
cover frequently using a wet cloth. This should be
done when the oven is completely cool.
3. Reconnect electrical power to the oven.
t
4
49 80701 1

Publicidad

loading

Este manual también es adecuado para:

Jb870 - 30Pb950 - 30