Publicidad
Idiomas disponibles
Idiomas disponibles
Know Your Air Compressor
READ THiS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR UNIT. Compare the illustrations with your unit to famiIiarize yourself with
the location of various controls and adjustments.
Save this manual for future
reference.
Gauge
Description
of Operation
Become familiar with these controls
before operating the unit.
On/Auto/Off
Switch: Turn this switch
ON to provide automatic power to the
pressure switch and OFF to remove
power at the end of each use.
Pressure Switch: The pressure
switch automatically
starts the
motor when the air tank pressure
drops below the factory set "cut-in"
pressure, it stops the motor when the
air tank pressure reaches the factory
set "cut-out"
pressure.
Safety Valve (not shown):
if the
pressure switch does not shut off
the air compressor
at its "cut-out"
pressure setting, the safety valve
will protect against high pressure
by "popping out" at its factory set
pressure (slightly higher than the
pressure switch "cut-out"
setting).
OutNet Pressure
Gauge:
The outlet
pressure gauge indicates the air
pressure available at the outlet side
of the regulator. This pressure _s
controlled by the regulator and is
always less than or equal to the tank
pressure.
Tank Pressure Gauge:
The tank
pressure gauge indicates the reserve
air pressure in the tank.
Regulator:
Controls the air pressure
shown on the outlet pressure
gauge. Pu!I the knob out and turn
clockwise to increase pressure
and counterclockwise
to decrease
pressure. When the desired pressure
is reached push knob in to lock in
place.
Universal Quick-Connect
Body:
The universal quick-connect
body
accepts the three most popular styles
of quick-connect
piugs- industrial,
automotive
(Tru-fiate), and ARO. One
hand push-to-connect
operation
makes connections simpte and easy.
The two quick connect bodies allow
the use of two tools at the same time.
A07184
12-ENG
Publicidad
