Publicidad
Idiomas disponibles
Idiomas disponibles
I
CAUTION:
DO NOT
letfamiliarity withyour saw make you careless°Remember
that
I
a careless
fraction
of a second
is sufficient
to cause
severe
injury.
I
................................................
, . .........................
.............J
Using the Laser Light Feature
(see Figs° 3 & 4)
!
/_WARNING:
DO NOT stare directly
at the laser beam.
NEVERaim
the light.a!....any person,,o,r,,,object
other than !,he workpiece.
..........
1. The tinted glasses
that were included
will enhance
the laser
light in bright light conditions.
DO NOT wear these glasses
if they interfere
with the safe operation
of this saw,
2. DO NOT turn the laser beam
on until the saw is on
the workpiece_
3. Mark the line of cut on the workpiece_
4. Adjust the cutting
angle and cutting
depth as needed,
5. Plug in the saw and push button to turn on laser. (See Fig° 3)°
6. Align laser beam with line-of-cut
(See Fig. 4),,
7, Squeeze
the trigger
switch and slowly
push the saw forward
using both hands° Keep the red laser light
beam on the
line-of-cut.,
8. ALWAYS
shut off the laser light when you are
finished
cutting,
.... j
'15
Publicidad
