PERSONALSAFETY cont.
3. ALWAYS
avoid
accidental
starting.
BE SURE
switch
is in
the "Off"
position
before
plugging
in. DO NOT carry tools
with your finger
on the switch_ Carrying
tools with your finger
on the switch
or plugging
in tools that have the switch
in
the "On" position
invites accidents,
4. ALWAYS
remove
adjusting
keys
or wrenches
before
turning
the tool
"On".
A wrench
or a key that is left attached
to a rotating
part of the tool may result in personal
injury,
5. DO NOT overreach.
ALWAYS
keep
proper
footing
and
balance
at all times.
Proper footing
and balance
enables
better control
of the tool in unexpected
situations,
6. ALWAYS
use safety equipment,
Always
wear
eye protection.
TOOL
USE AND CARE
SAFETY
1. ALWAYS
use clamps
or other
practical
ways
to secure
and support
the
workpiece
to a stable
platform.
Holding the work by hand or against
your body
is unstable
and may lead to loss of control
2. DO NOT force
tool.
Use the correct
tool
and blade
for your application.
The correct
tool and blade will do the job better and safer at the rate for
which
it is designed
3. DO NOT use tool
if switch
does
not turn
it "On"
or "Off".
Any tool that
cannot
be controlled
with the switch is dangerous
and must be repaired.
4. ALWAYS
disconnect
the plug
from
the power
source
before
making
any adjustments,
changing
accessories,or
storing
the tool.
Such
preventive
safety measures
reduce
the risk of starting
the tool accidentally.
5. ALWAYS
store
idle tools
out of reach
of children
and other
untrained
persons,Tools
are dangerous
in the hands
of untrained
users,
6. ALWAYS
maintain
tools with
care. Keep cutting
tools
sharp
and clean,
Properly
maintained
tools with sharp cutting
edges
are less likely to bind
and are easier
to control.
7. ALWAYS
check for misalignment
or binding
of moving
parts,
breakage
of parts,
and any other
condition
that
may affect
the tool's
operation.
If damaged,
have the tool serviced
before
using,
Many accidents
are
caused
by poorly
maintained
tools,
6