Energy Saving Tips; Connecting The Cooler - Dometic COOLFREEZE CF 18 Instrucciones De Uso

Nevera por compresor
Ocultar thumbs Ver también para COOLFREEZE CF 18:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation
7.2

Energy saving tips

Choose a well ventilated installation location which is protected against direct
sunlight.
Allow warm food to cool down first before placing it in the cooling device to
keep cool.
Do not open the cooling device more often than necessary.
Do not leave the cooling device open for longer than necessary.
Defrost the cooling device once a layer of ice forms.
Avoid unnecessary low temperatures.
7.3

Connecting the cooler

AC extension cord
!
WARNING!
Because of potential safety hazards under certain conditions, the
manufacturer strongly recommends against the use of an extension
cord. However, if you must use an extension cord, it is absolutely
necessary that it be a UL-Listed (in the United States) or a CSA-Listed
(in Canada) appliance extension cord, with 10 A (minimum), 120 V
electrical ratings.
!
CAUTION!
Under no circumstances should you attempt to splice extension
cord wires.
Do not use power strips or 2-way splitters.
Always unroll or uncoil an extension cord to avoid heat retention and
possible melting.
➤ Select a UL/CSA listed 120 Vw/≥ 10 A outdoor use extension cord according to
the following table:
120 Vw
Wire conductors
AWG
16
Maximum cord length
10 ft. (3 m)
25 ft. (7.6 m) 50 ft. (15.2 m)
3
14 (1.6 mm²)
12 (2 mm²)
CF18, CF25, CF35, CF40, CF50
3
3
12 (2 mm²)
100 ft.
(30.5 m)
3
12 (2 mm²)
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Coolfreeze cf 25Coolfreeze cf 35Coolfreeze cf 40Coolfreeze cf 50Cf 18Cf 25 ... Mostrar todo

Tabla de contenido