Marantz DD-82 Guia Del Usuario página 14

RECORDING EXAMPLES
RECORDING ON A BLANK DCC
Insert a cassette and close th
First the display will show}
oF
and afterwards --
Press APPEND
The deck searches for the start of side A and writes a buffer
area (LEAD-IN).
This buffer area is to guarantee optimum tape-recording
conditions.
Fi *
WRITE and -
After doing so, the RECORD PAUSE (FE
entered.
The deck is now ready to record track 1.
) mode is
(e Select the correct input source and adjust the recording level
e
when needed).
ss PAUSE Hl to start the actual recording.
" and START MARKER WRITE appears on the display
Press STOP lf when you want to stop recording.
The recording will be stopped and the deck marks the end of
the last recording. The display shows MARKER WRITE and
RECORDING ON A PARTIALLY RECORDED DCC
(e
Press APPEND
will search for the end of the last recording.
MO >> or 24 appears.
When this has been found the last 10 seconds of this music
track will be played back ( Sty), after which the
RECORD PAUSE (REF) mode is entered.
Select the correct input source and adjust the recording level
when needed).
Press PAUSE If to start the actual recording.
EEC and START MARKER WRITE appears on the display
oat
Press STOP if when you want to stop recording.
The recording will be stopped and the deck marks the end of
COMPLETELY OVERWRITING A RECORDED DCC
{e
Select side A with the PLAY ® key and Press STOP @ key.
Press <<,
The deck will rewind to the beginning of side A and will stop
automatically at the beginning of the tape.
Press APPEND
When the tape already contains a LEAD IN area the deck will
play back the first 10 seconds of track nr. 1, after which it
will go back to the beginning of this track and enter the
RECORD PAUSE mode. (!
Press RECORD
When the tape does not yet contain a LEAD IN area. The
deck will now write a LEAD IN area at the beginning of side
A and will enter the RECORD PAUSE mode (! G:00 RECF).
Select the correct input source and adjust the recording level
when needed).
Press PAUSE Ill to start the actual recording.
and START MARKER WRITE appears on the display
* Press STOP m when you want to stop recording.
The recording will be stopped and the deck marks the end of
the last recording. . The display shows MARKER WRITE and
13
RECORDING ON A SPECIFIC LOCATION
e Press RECORD
The deck will enter the RECORD PAUSE (FECF) mode at
the current position.
e Press PAUSE Ito start the actual recording.
and START MARKER WRITE appears on the display
Bef bef
PE
¢ Press STOP lm when you want to stop recording.
NO RECORDINGS CAN BE MADE:
-~ Ona prerecorded DCC
— Onaconventional analogue cassette
- Ona DCC which is protected against recording.
This protection can be activated and deactivated with the red
switch on the bottom of your cassette.
See also page 8 'PROTECTING A CASSETTE AGAINST RECORDING'