Marantz DD-82 Guia Del Usuario página 6

INSTALLATION tee page 110, 111)
ANALOG CONNECTIONS:
@ VARIABLE OUT — Output sockets for connection to an analog
amplifier or HiFi system. Use this connection when you want
to control the volume with the supplied remote control.
Insert a red plug into the R socket and the other plug into
the L socket.
Insert the two other plugs into the corresponding sockets
of the DCC IN input of your amplifier.
You can also use the TAPE, CD, AUX or TUNER inputs of
your amplifier but never the PHONO input.
When you have connected your recorder via these
VARIABLE OUT sockets, the sound level can be adjusted
with the VOLUME keys of the remote control supplied
with your unit. ;
FIXED OUT — Output sockets for connecting the recorder
to an analog amplifier or HiFi system. Use this connection
when you want to contro! the volume on-your amplifier or
on the remote control of your amplifier only.
Connection takes place in the same way as via VARIABLE
OUT.
Note: Only one of above mentioned connections (VARIABLE
©
OUT, FIXED OUT) is needed.
LINE IN — Recording input for connection to an analog
amplifier
Insert a red plug into the R socket and the other plug into
the L socket.
Insert the two other plugs into the corresponding sockets
of the DCC OUT output of your amplifier. You can also use
the TAPE, or AUX outputs of your amplifier.
DD-82/DD-92
AMPLIFIER
DIGITAL CONNECTIONS:
@® DIGITAL COAXIAL
Pull out the protective plug from the socket.
DD-82/DD-92
ANALOG DIGITAL
OUTPUT —7— INFUT-—F—= COAXIAL OPTICAL
vaz mK | LINE | wy guy | our
'@ © @:
© © OA GE
ae
AMPLIFIER