Descargar Imprimir esta página

Polar Q LOG Serie Instrucciones De Uso Para El Usuario página 26

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

- To set the start time of the charging process press
selection menu.
Press
and
e
Press
to confirm.
e
Press
and
10
Press
to confirm.
This setting will remain unchanged even after the charger was turned off.
- To set the time after which the charger will start charging process,
e
press
to enter the delay time setting menu.
Press
and
e
each step adds 30 minutes up to 4h
e
Press
to confirm.
This setting will remain unchanged even after the charger was turned off.
Once the start time of the charging
or delayed start has been set,
connect the battery to the charger.
e
Then the scheduled time for the start
of charging will appear on the screen.
ATTENTION: the actual start delay will always be the last one set.
To reset and cancel programmed start to charge settings,
both set up of start time to charge and delay charge start, when you see
"No Battery '' press
Then press
e
Use
to set the time to 00:00.
This procedure will reset and cancel both of delayed start settings.
to set the hour.
to set the minutes.
set the time,
to enter the Delayed Start setup menu.
10.24.42
No
Battery
again to enter the delay time setting menu.
to enter the time
Set Starting Time
Time: 19:30
Set Starting Delay
02:30
Start at:
Time: 12.56
Setting
Delayed Start
+ : Set Time
- : Set Delay
10.24.57
10.25.31
10.26.14
10.24.46
26.

Publicidad

loading