STORINGTOOLS
Place
hose
and
upholstery attachment
into
their
storage
locations. Store for next
use.
Upholstery/
StairHose
I
Upholstery/
Stair
Attachment
CARRYHANDLE
Grasp the carry handle
on the front of the unit
to move unit from room
to room.
DIRTYWATERTANK
Your carpet cleaner is equipped with a shut off valve
within your dirty water tank. When the dirty water
tank becomes full, the blue float (viewed from top of
tank) will rise, shutting off the air flow thru the nozzle.
NOTE: The float in your carpet cleaner, located in the
dirty water tank lid, will shut off the suction when the
dirty water tank is full. For best results, use smooth,
steady motion keeping the nozzle flat against the
carpeting. Tipping the cleaner and breaking the seal
of the nozzle and carpeting will cause the float to rise
and shut off the suction. Once the float is activated,
empty the dirty water tank. If the dirty water tank does
not appear full, turn the power switch off and wait for
the float to settle and reset. If the float repeatedly
shuts off the suction, empty the dirty water tank. For
best results, use only Hoover_ brand detergent.
Other Solutions may generate excessive foam which
will cause the float to rise prematurely and shut off
the suction. Use five capfuls (5 ounces) of Hoover _
brand detergent per fill up of the Clean Water
Solution Tank. A higher concentration of shampoo
may cause excessive foaming.
How to Empty
2.17 Grasp top of dirty water tank handle and push
latch to release.
2.18 Grasp handle and pull tank out of base.
2.19 Remove dirty water tank lid.
2.20 To empty dirty water tank, grasp handle with
one hand and nozzle with the other and empty into
sink. Replace dirty water tank lid.
2.21 Rinse dirty water tank and filter with hot tap
water. Wipe and let dry thoroughly before storing to
prevent mildew from forming.
• IMPORTANT •
Do not use any chemicals when cleaning.
• IMPORTANTo
Do not transport the carpet cleaner with either
the Clean Water Solution Tank or Dirty Water
Tank full.
• IMPORTANTo
You will hear a noticeable change in the pitch of
the cleaner. This indicates a need to empty the
dirty water tank.
A WARNING A,
To reduce the risk of injury from moving parts,
unplug before servicing.
To reduce the risk of fire, electric shock or injury,
unplug before servicing.
10