Plug Replacement
This appliance is supplied with a BS 1363 3 pin plug fitted with a 10Amp fuse. Should the fuse require
replacement, it must be replaced with a fuse rated at 10mp and approved to BS 1362.
In the event the mains plug has to be removed/ replaced for any reason, please note:
IMPOTRANT: THE WIRES IN THE MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE;
Blue - Neutral
Brown - Live
As the colors of the wires in the mains of this applicance may not correspond with the coloured marking
identifying with the terminals in your plug, proceed as follows.
The blue wire must be connected to the terminal marked with an N or coloured black.
The brown wire must be connected to the terminal marked with an L of coloured red.
The yellow-green wire must be connected to the terminal marked with an E or coloured yellow-green.
WARNING: NEVER CONNECT LIVE OR NEUTRAL WIRES TO THE EARTH
TERMINAL OF THE PLUG.
Technical data
Power supply: AC 220-240V~ 50Hz
MODEL
NY2009-20MR
This product complies with conformity requirements of the applicable European
Regulations or Directives.
This product complies with conformity requirements of the applicable UK Regulations.
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or local store for recycling advice.
xxWyy
xx-year; yy-week of the year
5059340471648_MNL_IN_V06.indb 6
5059340471648_MNL_IN_V06.indb 6
GREEN/YELLOW
Earth
E
BLUE
Neutral
N
Cord Clamp
POWER REGULATION RANGE (W)
Low power (-)
800W
BROWN
Live
L
Fuse
10 Amps
Middle power (--)
1200W
6
High power (---)
2000W
27/6/2022 11:19 AM
27/6/2022 11:19 AM