cecotec CLASSICTOAST 15000 BLUE EXTRA DOUBLE Manual De Instrucciones página 33

1. PARTS AND COMPONENTS
Fig. 1
1. 2 38-mm toasting slots
2. Cool-touch surface
3. Toasting level knob/display
4. Crumb tray
5. Stop button
6. Reheat button
7. Defrost button
8. Toasting lever
9. Warming rack
NOTE
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
- Before using the toaster for the first time, it is important to perform a toasting process
without bread. We recommend 4 or 5 times. Push the toasting lever down until it latches
into place.
- When the toasting is finished, the toasting lever automatically springs up. The toaster is
now ready to be used with bread.
Warning:
A slight odour and smoke might appear when using the appliance for the first time. This is due
to manufacturing material residues and does not affect the operation of the appliance.
CLASSICTOAST 15000 BLUE/BEIGE/YELLOW EXTRA DOUBLE
ENGLISH
33