Publicidad
Idiomas disponibles
Idiomas disponibles
ff OPERATING PROCEDURES
TURN ON THE HA-11
Before you play the HA-11, check the power cable is plugged into the AC outlet on the wall and turn the
power on. When the power is on, the lamp beside the power switch will be lit.
Every time you turn the power on, the HA-11 will be in original factory settings. The original factory
settings are as follows.
Tone:
Concert Grand Piano
Reverb:
Room
Resonance:
Normal
Pitch:
Standard pitch, A=440Hz
PANEL OPERATION
There are two ways to control the functions or change the settings of the HA-11. One is Panel Operation
and the other is Pedal-And-Key Operation.
On Panel Operation, you can do the following things with
control panel.
1. Selecting a Sound
The HA-11 incorporates totally 13 digital tones; five acoustic piano sounds which have been digitally
sampled from our concert grand piano, and eight other sounds. To select one of these sounds, press the
PIANO button or the ASSIGNABLE button as many times as necessary until you reach the desired sound.
Each time the button is pressed, a different sound is produced. A red lamp will light to indicate which
button is currently selected.
PIANO BUTTON
ASSIGNABLE BUTTON
FM)
[94
—]
=
=
=
EH
[|
[]
H
и
Concert Grand Piano
Classic Electric Piano
|
Studio Grand Piano
Modern Electric Piano
Mellow Grand Piano
Jazz Organ
|
|
Modern Piano
Church Organ
Rock Piano
ARE
ar
an
"o
You can also select a sound on Pedal-and-Key Operation (see Page 10).
Layering two sounds (DUAL)
"o
You can combine a piano sound with a tone selected from the ASSIGNABLE sounds
m
ЙЫШ...
and layer them across the keyboard. This function is called "DUAL".
LI
LI
ASSIGNABLE
PIANO
English - 8
Publicidad
