Beaba N6T Manual página 16

3. Wait for the unit to cool down, and clean the tank and surfaces with a damp
cloth or sponge. Wipe carefully.
Five automatic programs are available :
• Steam fast mode : heat a bottle of milk /water quickly with steam
• Baby jar mode : heat baby food jar in water bath
• Water bath mode: heat the breast milk slowly in water bath and maintain the
temperature
• Defrost mode: defrost breast milk in water bath
• Sterilize mode: sterilize baby bottle
Note: To reset the default settings of the appliance's programmes (times and
temperatures), press on + and – together for 5 seconds.
STEAM FAST MODE
The Steam Fast mode is used to heat milk or water by steam. It only takes 2 to 5
minutes to obtain a bottle at a temperature of approximately 37°C.
1. Pour 40ml water into the bottle warmer.
2. Place the bottle and lift-out basket into the bottle warmer.
3. Put the lid on.
4. Press the ON/OFF button.
5. Press the Steam Fast mode button.
6. When the time indicator flashes, press the setting button +/- to choose the
warming time as you wish (1-10 mins). The deafult time is 3 minutes.
7. The bottle warmer will start working after the time indicator flashes twice. The
Steam Fast mode button keeps flashing and time indicator is counting down
while this function is working.
8. The bottle warmer will beep 5 times at the end of countdown.
BE CAREFUL, RISK OF BURNING
timer run out to avoid overheating.
Always check that the temperature of the milk is not too high and that there
is no risk of burning your child.
Recommendations* for warming time in minutes to get a baby bottle at
approximatively 37°C (only for Steam Fast mode) :
Take the bottle out immediately after
16