Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance & Care
Cleaning or Replacing the
Vacuum Filter
The key to maximum performance is having a
clean filter. Cleaning the filter after each use will
help your vacuum operate at peak efficiency.
Use only genuine BISSELL Symphony
replacement filters in your BISSELL hard floor
cleaner. To purchase visit www.BISSELL.com.
To clean filter:
1. Turn power off and unplug unit.
2. Remove the dirt container from the unit, as
directed above.
3. Remove filter and tap firmly against the inside
of a waste container, removing any visible dirt.
4. Replace filters back into the dirt container
and attach dirt container to the base of the unit.
Slide the lever to your right to lock.
NOTE:
• After heavy usage, you may clean the
pre-motor, foam filter by washing it gently
by hand in warm water and mild dish
detergent. Rinse thoroughly and make certain
it is completely dry before replacing it.
• You may replace the paper, pleated filter
when dirty. Recommended replacement is
every 6 months.
Reference page 10 for replacement part
information.
www.BISSELL.com
10
WARNING
To reduce the risk of electric shock, turn power switch off
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
2.
3.
Publicidad
