Problem
DEMO appears on the display.
A
or
or
symbol is shown
instead of numbers on the tempera‐
ture display.
If the advice does not lead to the desired
result, call the nearest Authorized
Service Centre.
8.2 Closing the door
1. Clean the door gaskets.
9. NOISES
CLICK!
BLUBB!
Possible cause
The appliance is in the demonstra‐
tion mode.
Temperature sensor problem.
2. If necessary, adjust the door. Refer to
3. If necessary, replace the defective door
SSSRRR!
Solution
To exit the demonstration mode,
press and hold the OK button for ap‐
proximately 10 seconds until you
hear a long sound and the display
turns off for a short time.
Contact the nearest Authorized
Service Centre. The cooling system
will continue to keep food products
cold, but temperature adjustment
will not be possible.
installation instructions.
gaskets. Contact the Authorised Service
Centre.
BRRR!
HISSS!
ENGLISH
15