Descargar Imprimir esta página

Husqvarna Z560X Manual De Usuario página 29

Ocultar thumbs Ver también para Z560X:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 69
Remove the battery. Clean it, charge it, and keep it
cool during storage.
Replace the engine oil, and discard the waste oil.
Empty the fuel tank. Start the engine and run it until
there is no remaining fuel.
Note:
Do not empty the fuel tank if a stabilizer has
been added.
Remove the plugs and put about a tablespoon of
engine oil into each cylinder. Manually turn the
engine shaft to apply the oil and put the plugs back
on.
Lubricate all grease nipples, joints and axles.
Keep the product in a clean and dry area and put a
cover on it for more protection.
Disposal
Chemicals can be dangerous and must not be
discarded on the ground. Always discard used
chemicals at a service center or an applicable
disposal location.
When the product is worn out, send it to the dealer
or to an applicable recycling location.
Oil, oil filters, fuel and the battery can have negative
effects on the environment. Obey the local recycling
requirements and applicable regulations.
Do not discard the battery as domestic waste.
Send the battery to a Husqvarna service agent or
discard it at a disposal location for used batteries.
2173 - 002 - 22.08.2023
29

Publicidad

loading