Descargar Imprimir esta página

Chicco activ3 Manual Del Usuario página 12

Ocultar thumbs Ver también para activ3:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
in middle or rest position, but only with the handle in
carrying position.
USING THE CARRY COT AS A PRAM
This carry cot can be used in the stroller version mounted on
the Chicco stroller equipped with the "Clik Clak" system.
FASTENING THE CARRY COT TO THE STROLLER
Prepare the stroller, equipped with the Clik Clak system, to
assemble the carry cot according to the stroller's instructions.
Note: for strollers equipped with a detachable backrest
or seat, removing the backrest or seat as explained in the
stroller's instruction manual is advisable.
12. Grab the handle in transport position and place the carry
cot on the armrests with the foot area facing the handle
of the stroller (Fig. 12).
13. Match the pins placed on the two sides of the carry cot
with the openings on the armrests of the stroller (Fig.
13A), then place the carry cot until you hear a click (Fig.
13B).
WARNING: before using, make sure that the carry cot is
properly attached by pulling it upwards.
REMOVING THE CARRY COT
14. Bring the handle to the vertical position (transport
position) until you hear a click (Fig. 14).
15. Press the button in the front part of the pram (Fig. 15A),
then, keeping the button pressed, lift the carry cot from
the structure (Fig. 15B).
WARNING: The fastening and releasing operations can be
carried out also with your child inside the carry cot; however,
these operations may be more difficult to execute due to
the child's weight. Pay attention when carrying out the
aforementioned operations.
WARNING: an incorrect fastening of the carry cot to the
frame (e.g. reverse assembly) can cause a malfunctioning of
the connection system and making the release impossible:
in this case consult the instructions of the stroller or contact
the Artsana Customer Service.
WARRANTY
The product is guaranteed against any lack of conformity
under normal use as specified in the instructions.
The warranty shall not therefore apply in the case of damage
caused by improper use, wear or accidental events.
For the duration of the warranty on conformity defects
please refer to the specific provisions of applicable national
laws in the country of purchase, where appropriate.
12

Publicidad

loading