PATONA PREMIUM Serie Manual página 4

EN ►PATONA Powerbank Clear 3.0
A. Product overview
1. LEDs
2. USB-C PD20W
B. Usage
1. Charging the power bank
Connect the included USB cable to the powerbank and a suitable
power source.
» You can use a power adapter or your computer's USB port.
» Pay attention to the voltage readings.
» When the powerbank is fully charged, the LEDs light up
continuously.
2. Charging smartphones and other devices
Connecting the powerbank via cable:
» You can use a compatible USB-C cable or a certified USB-C to
Lightning cable (older Apple models).
» The charging process will start automatically.
» When the device is fully charged, the powerbank will turn off
automatically.
Connect the powerbank via MagSafe (iPhone):
» The charging process is started automatically.
» When the iPhone is fully charged, the powerbank turns off
automatically.
3. Check remaining battery capacity
Press the power button, the LEDs will light up to indicate the
remaining capacity.
» The LEDs will turn off automatically after 30 seconds.
3. ON/OFF
4. MagSafe