Publicidad
Idiomas disponibles
Idiomas disponibles
B. POWER CORD SAFETY TIPS:
1. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
2. Never pull or yank on the cord or the appliance.
3. To insert plug, grasp it firmly and guide it into outlet.
4. To disconnect appliance, grasp plug and remove it from outlet.
5. Before each use, inspect the power cord for cuts and/or abrasion marks. If any are found,
this indicates that the appliance should be serviced and the power cord replaced. Please
return it to our Service Department or to an authorized service representative.
6. Never wrap the cord tightly around the appliance, as this could cause the appliance to fray
and break.
7. Do not operate appliance if the power cord shows any damage, or works intermittently and
stops working.
8. The plug should be placed in a convenient location, easy grip within reach so that it can be
quickly unplugged when needed.
C. COMPONENTS
D. INSTRUCTIONS FOR USE
1. Before every use, ensure that the appliance is in a good condition and that the electric cord is not damaged. If
the power cable is damaged, it must be replaced by the manufacturer or by its technical support service, or in
any case by a similarly qualified person, in order to prevent any risks.
2. Plug the appliance into the electrical socket.
3. The appliance features a timer that allows it to switch off automatically once a pre-set time has passed. To set
the time, turn the timer switch (3) clockwise until it reaches the position that matches the desired running time
(0-60 min.). In order to allow the appliance to operate continuously, without the use of the timer, turn the
switch in an anticlockwise direction until it reaches the "ON" position.
4. Ventilation:
Select the desired speed using the switch (2), by turning it to one of the following positions: 0 = Off
1 = Minimum speed 2 = Medium speed 3 = Maximum speed
5. To power the appliance off, turn the speed switch to the "0" position, or turn the timer switch to the "OFF"
position, then disconnect the plug from the electric socket.
6. Vent rotation: this is activated using the switch (1).
7. During long periods of inactivity, disconnect the plug from the electric socket.
1.
OSCILLATION SWITCH
SPEED REGULATOR
2.
TIMER
3.
PROTECTIVE GRILL
4.
BLADES
5.
6
Publicidad
