cecotec WANDERLUSTMIX USB Manual De Instrucciones página 36

ENGLISH
1. PARTS AND COMPONENTS
1. Lid
2. Blades
3. Power button
4. USB charging port
5. Base
6. Plastic cup
7. Motor
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
- USB blender
- Micro USB charging cable
3. PRODUCT ASSEMBLY
1. Check that the silicone gaskets are correctly installed on the lid and the base of the
blades. This is very important to avoid leakage.
2. Screw the cup clockwise onto the base of the blades until, when the button is pressed,
the indicator light shows a white light.
4. OPERATION
Indicator light instructions
1. Press the power button twice so that the blender starts operating. The indicator light
shall be white. The blender will operate for a programmed time of 45 seconds and then
36 BATIDORA DE VASO INDIVIDUAL USB / USB SINGLE-SERVE JUG BLENDER