On The Wall; Portable - Haverland OSYRIS Manual De Uso

2. INSTALLATION EN

2.1 ON THE WALL:

A. Put the hanging rack on the
wall as a guide ruler (please make
sure the holes at parallel level) ,
use a mark pen to mark the holes
position.
B. Drill holes on the wall with ɸ
8mm drill bit and insert the plastic
wall plug.
C. Fasten the hanging rack on
the wall with the screws, do make
sure the hanging rack is in correct
direction
D. Gently insert the heater body of
the bottom to the hanging rack first
and then push the heater body to
be hooked on the whole hanging
rack.

2.2 PORTABLE:

Put the heater on a flat, dry and clean surface. Install the rollers as shown on the below drawing.
(Stand feet with wheels is optional)
EN
OSYRIS
17