STERWINS 900 JET IC-3 Manual De Instrucciones página 119

DANGER! Risk of injury due to electric shock.
Warning! Always remove the plug from the socket before servicing,
cleaning or storage.
Servicing
If the pump becomes clogged, connect the discharge line to the water line and disconnect
the suction hose. Open the water line than switch on the pump several times for approx. two
seconds. This should solve most clog-related problems.
Storage
Open the water drain screw
Store the pump so that it is protected from frost.
After long periods of stoppage, make sure the rotor turns correctly by briefly switching the
pump on and off.
20151208 SPECIFICATIONS 250 TP-3 EXE.indd 119
4 , empty the pump completely and allow it to dry.
119
7. MAINTENANCE
08/12/15 16:21
EN