Publicidad
POWERED AIR PURIFYING RESPIRATOR
e
User Instructions
IMPORTANT NOTICE
Please read these instructions carefully before unpacking your JACKSON SAFETY AIRMAX+ PAPR. Failure
to comply with the instructions in this leaflet may void your limited product warranty and adversely affect
your health and safety.
The selection of this respiratory for the application should be the result of the risk assessment conducted
by a professional health and safety officer. Its use should be strictly in accordance to the instructions
provided along with the product. If you have any questions regarding the suitability of this product for your
assigned task, please contact your designated health and safety officer or use our dedicated technical
help line for further support.
The use of this system is limited to the product variants indicated in this packaging. Any alteration made
to adapt to other protective devices may end up affecting the health and safety of the wearer.
CONTENT
This JACKSON SAFETY AIRMAX+ powered respirator system should include:
• Blower Unit and PRSL Filter
• Waist belt
• Welding helmet head top (welding helmet and hood/head gear) unit or grinding (visor and hood) unit
• Hose and hose cover assembly
• Battery charger
• Lithium-ion battery
• Instruction Manual
• Flow-Test-Unit
SYSTEM OVERVIEW
JACKSON SAFETY AIRMAX+ has been designed and manufactured to comply with EN 12941:1998+
A1:2003+A2:2008 TH3 P R SL.
This powered air purifying respirator is belt mounted and provided with a high efficiency SL replaceable filter
canister that provides a filtration efficiency level above 99.8%. The respiratory system will provide a Nominal
Protection Factor (NFP) of 500 when used in conjunction with an original JACKSON SAFETY AIRMAX+ par-
ticulate filter CE marked as EN 12941:1998+A1:2003+A2:2008 TH3 P R SL.
The blower (4 cells battery pack) weights 900gr at a minimum flow rate of 170LPM for at least 8 hours at
a comfortable noise intensity of <70 dB. Lithium-ion batteries can be recharged multiple times and finally
replaced at the end of their lifetime, they should be fully charged at the beginning of the working shift.
The blower unit incorporates a number of safety measures to avoid the inadvertently change in the flow
conditions that include:
• The device has an audible alarm to indicate a blocked filter or low battery
• The device alarm activates for about 1 second when the blower unit is switched on, and deactivates once
the minimum operational flow rate is achieved. Please consider the power-off state an abnormal situation
while in use
• The switch for the air supply is recessed and so not possible to switch the air supply off inadvertently
A Flow-Test-Unit is provided along with every AIRMAX+ PAPR unit to verify the right air flow supply condi-
tions. Please follow the instructions and recommendations provided in this manual.
2
Publicidad
