Publicidad
Interchange Welding Helmet System Instructions
Welding Helmet Attachment and Blades:
1. Hard hat can be worn with the brim forward or backwards. Insert blades into the cap slots
with the button always facing the back of the suspension. (Figure 1)
2. Remove the keeper from the latch with a flat screwdriver. Assemble the attachment
to the welding helmet. (Figure 2/3)
3. Place hard hat on head. Bring welding helmet towards face and insert attachment posts into
the blades. Press firmly on the red knobs inward until a positive click for full engagement.
4. Adjust desired tension with the red knob. Clockwise to tighten. Counter-clockwise to loosen.
Figure 1
Markings
Scale number (shade)
Identification of the manufacturer
Optical class
Liquids (droplets and splashes)
Number of the EN standard
Symbol for mechanical strength -
Medium energy impact resistance (between 45 and 120 m/s)
Certification marking
The PPE is subject to the conformity assessment procedure according to Regulation (EU) 2016/425 and the
harmonized standard EN 166:2001 and EN 169:2002.
Notified body 1883, ECS (European Certification Service) GmbH, Hüttfeldstraße 50, D-73430 Aalen, Germany.
latch
button
Figure 2
blade
© Copyright 2020, Surewerx
32
keeper
knob
SM
1
Figure 3
3
166
B
JA5447_12/2020
Publicidad
