Descargar Imprimir esta página

cecotec BIGDRY 10000 EXPERT CONNECTED Manual De Instrucciones página 56

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1.
Power cable
2. Water tank
3. Continuous water drainage
4. Filter grille
5. Back housing
6. Air outlet
7.
Top cover
8. Front housing
9. Water level indicator
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the device out
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the Official Cecotec Technical Support Service
immediately.
WARNING
-
Use only products recommended by Cecotec to speed up the defrosting process or to
clean the appliance.
-
The appliance must be stored in a place free from sources of ignition that are in
continuous operation (e.g., open flames, burning gas appliances or electric heaters).
-
Do not pierce or burn.
-
Be aware that refrigerants may not contain an odour.
-
The appliance must be installed, operated, and stored in a room with a floor area larger
than 4 m².
56
BIGDRY 10000 EXPERT CONNECTED

Publicidad

loading

Este manual también es adecuado para:

08315Bigdry 8000 expert connected08314