cecotec READYWARM 1570 MAX CERAMIC ROTATE SMART WHITE Manual De Instrucciones página 32

ENGLISH
3. Press the Standby button (button 1, Fig. 2) to turn on the heater.
4. Oscillation function: Press the Oscillation button (button 2, Fig. 2) to activate oscillation
function. Then, press it again to deactivate it.
5. Press the Timer button (button 3, Fig. 2) to adjust the timer. The display will show 0h (timer
cancelled), 1h, 2h, ..., 9h. When the timer is activated, the display will show the remaining
operating time.
6. Temperature settings: press the Temperature Setting button (button 5, Fig. 2) to set the
temperature: 10℃→15℃→20℃→23℃→27℃→30℃.
7. Power setting: press the Power Adjustment button (button 6, Fig. 2) to choose the working
power mode.
You can select between the different modes as follows:
Mode
Operation
8. LED display brightness
The default brightness is 100% when switched on. Press the LED display brightness adjustment
button (button 7, Fig. 2) to change the brightness from 100%, 50%, 25% and switch off the
display.
Note: if you do not press any button within 1 minute at 100% brightness, the brightness will be
reduced to 50% automatically to save energy.
9. To switch off the heater, press the Standby button (button 1, Fig. 2) on the control panel,
press the switch on the back and unplug the power cord from the socket.
4. CLEANING AND MAINTENANCE
- Always unplug the device from the power supply before cleaning it.
- Use a soft, damp cloth and a mild soap solution if desired to carefully clean the exterior
surface of the product.
- CAUTION: allow the product to cool down completely before cleaning or handling it.
- Do not allow water or other liquids to enter the interior of the product.
- It is recommended to clean the appliance on a regular basis. Vacuum the grilles of the
32 READYWARM 1570 MAX CERAMIC ROTATE SMART WHITE / BLACK
H0
Fan Mode
H1
Low Mode
H2
High Mode