Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3.4 Slitting with template
N 200
N 200
(2A1)
(3A5)
h
a
a Distance between contour of the tem-
plate and contour of the workpiece
h Template thickness
r
Minimum template radius
s
When slitting with a template, the following
minimum dimensions must be heeded:
N 200
(2A1)
a
h
r
s
3.5 Cutting radii
When cutting radii, the minimum inside ra-
dius (r
) must be heeded.
min
N 160
N 200
(2A5)
(2A1)
r
24 mm
min
20
r
s
N 200
(3A5)
2.5 mm
3–5 mm
6.5 mm
PN 200
PN 200
(2A1)
(3A5)
N 200
(3A5)
PN 201
PN 201
(2A1)
(3A5)
4 mm
50 mm
Translation of the original operator's manual
4 Consumables and
accessories
4.1 Tool selection
For gentle work and good cutting perfor-
mance, make sure that the blades are sharp,
and that they are changed promptly.
For notes about selecting the correct tool, as
well as accessories, spare parts lists for
wearing parts, tools, and rechargeable bat-
tery packs, see:
N 160
(2A5)
N 200
N 200
(2A1)
(3A5)
PN 200
PN 200
(2A1)
(3A5)
PN 201
PN 201
(2A1)
(3A5)
4.2 Alternative rechargeable
batteries
N 160
(2A5)
This power tool can be used with all
CAS LIHD 12 V and CAS LI-Ion 12 V
rechargeable batteries.
N 200
PN 200
PN 201
(3A5)
(3A5)
(3A5)
be used with all CAS LIHD 18 V and CAS LI-
Ion 18 V rechargeable batteries up to a ca-
pacity of 8 Ah.
These power tools can
Publicidad
