Makita UB402MP Manual De Instrucciones Original página 8

EC Declaration of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Hiroshi Tsujimura
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Blower Attachment. Designation of
Type(s): UB402MP.
Fulfills all the relevant provisions of 2006/42/EC and
also fulfills all the relevant provisions of the following
EC/EU Directives: 2000/14/EC and are manufactured in
accordance with the following Harmonised Standards:
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A14
:2019+A2:2019, EN 50636-2-100:2014.
Place and date of declaration: Kortenberg, Belgium.
31.10.2022
Responsible person: Hiroshi Tsujimura, Director -
Makita Europe N.V.
Declaration of Conformity (For UK)
For UK only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Hiroshi Tsujimura
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Blower Attachment. Designation of
Type(s): UB402MP.
Fulfills all the relevant provisions of S.I. 2008/1597
(as amended) and also fulfills all the relevant
provisions of the following UK Regulations: S.I.
2001/1701 (as amended) and are manufactured
in accordance with the following Designated
Standards: EN 15503:2009+A1:2013+A2:2015, EN
50636-2-100:2014.
Place and date of declaration: Kortenberg, Belgium.
31.10.2022
Responsible person: Hiroshi Tsujimura, Director -
Makita Europe N.V.
Importer: Makita (UK) Limited, Michigan Drive,
Tongwell, Milton Keynes, Buckinghamshire, MK15
8JD, UK
SAFETY WARNINGS
Blower Safety Instructions
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this machine as well as the instruction man-
ual of the power unit before using. Failure to follow
all instructions listed below may result in electric
shock, fire, and/or serious injury to the operator and/
or bystanders.
Save all warnings and instruc-
tions for future reference.
The term "blower" and "machine" in the warnings and
precautions refer to the combination of the attachment
and the power unit.
Training
1. Read the instructions carefully. Be familiar with
the controls and the correct use of the blower.
Never allow children, persons with reduced phys-
2.
ical, sensory or mental capabilities or lack of
experience and knowledge or people unfamiliar
with these instructions to use the blower. Local
regulations may restrict the age of the operator.
3. Never operate the blower while people, espe-
cially children, or pets are nearby.
4. Keep in mind that the operator or user is
responsible for accidents or hazards occurring
to other people or their property.
Preparation
1. Always wear substantial footwear and long
trousers while operating the blower.
Do not wear loose clothing or jewellery that
2.
can be drawn into the air inlet. Keep long hair
away from the air inlets.
Always wear protective goggles to protect
3.
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.
8 ENGLISH