HIKOKI C 1806DUM Instrucciones De Manejo página 15

31 Guide grooves
32 Guide rail
33 Rubber lip
34 Lumber
35 Latch
36 Washer (A)
37 Battery level indicator switch
38 Battery level indicator lamp
39 Display panel
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
C1806DUM: Cordless Circular Saw
To reduce the risk of injury, user must read
instruction manual.
Always wear eye protection.
Always wear hearing protection.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive
2012/19/EU on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools that
have reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
V
Rated voltage
n
0
No-load speed
Switching ON
0
Switching OFF
Disconnect the battery
Warning
Prohibited action
Silent mode ON
Silent mode OFF
Always ON (turns off after 60 seconds)
Always OFF
Until it makes contact
Lock
Unlock
Battery
Lights ;
The battery remaining power is over 75%.
Lights ;
The battery remaining power is 50%–75%.
Lights ;
The battery remaining power is 25%–50%.
Lights ;
The battery remaining power is less than 25%.
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains
the accessories listed on page 268.
Standard accessories are subject to change without notice.
APPLICATIONS
Cutting various types of wood.
SPECIFICATIONS
1. Power tool
Model
Voltage
No-load speed
15
English
C1806DUM
18 V
4500 min- 1 (Power mode)
2500 min- 1 (Silent mode)