Delivery Scope; Intended Use; Technical Data - Bosch PST 700 E Manual Original

OBJ_BUCH-1067-004.book Page 10 Wednesday, June 5, 2013 7:03 PM
10 | English
Symbol Meaning
PST 700 E/PST 7000 E: Jigsaw with
electronic control
Grey-marked area: Handle (insulat-
ed gripping surface)
Read all safety warnings and all in-
structions
Before any work on the machine
itself, pull the mains plug from the
socket outlet
Wear protective gloves
Additional information
Movement direction
Reaction direction
Next step of action
Prohibited action
Correct result
Extraction
Sawdust blower device
Switching On
Switching Off
On/Off switch lock-on
Low stroke rate
High stroke rate
1 609 92A 083 | (5.6.13)
Symbol Meaning
When sawing metal, apply
coolant/lubricant alongside the
cutting line
Article number (10-digit)
P Rated power input
1
n Stroke rate at no-load
0
Cutting depth, max.
Wood
Aluminium
Metal
Particle board
Weight according to
EPTA-Procedure 01/2003
Symbol for protection class II
/II
(completely insulated)
L Sound pressure level
pA
L Sound power level
wA
K Uncertainty
a Vibration total value
h

Delivery Scope

Jigsaw.
"Cut Control", splinter guard, application tools and other ac-
cessories shown or described are not part of the standard de-
livery scope.
A complete overview of accessories can be found in our ac-
cessories program.

Intended Use

The machine is intended for making separating cuts and cut-
outs in wood, plastic, metal, ceramic plates and rubber while
resting firmly on the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw blade recom-
mendations are to be observed.

Technical Data

The technical data of the machine are listed in the table on
page 63.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.
Bosch Power Tools