Abus FUBE50000 Manual De Instalación Y Usuario página 32

Technical data
 PSU type
 Environmental class
 Encryption
 Certifications
 Access code
 Conformity
32
a fault report is sent to the alarm control panel and the
user is informed. The external power supply is not
monitored in this mode.
During operation with an external power supply
(DIP switch 3 deactivated), a fault report is sent to the
alarm control panel as soon as this is interrupted.
The wireless control panel is then automatically powered
by the batteries. The corresponding notification on the
alarm control panel informs the user about this.
Type B (50131-1 §9 and 50131-6 §4.1)
external power supply via power supply unit and batteries
inserted as a backup power supply
Type C (50131-1 §9 and 50131-6 §4.1)
battery operation only, without external power supply via
power supply unit
Power supply compliant with
EN50131-1:2006+A1:2009 9.2 and EN50131-6 if installed
correctly together with Secvest Wireless Alarm System
FUAA50xxx
II (EN50131-1 §7, EN50131-3 §7)
– 2) variants
24
16.777.214 (2
EN50131-3
4-digit or 6-digit
The FUBE50000 Secvest wireless control device is
compliant with EN 50131-1, EN50131-3:2009, EN 50131-
5-3 and EN 50131-6 security level 2 if installed correctly
together with Secvest Wireless Alarm System FUAA50xxx
(third party testing - verified by ANPI).