EN
3.4. APPLICATION OF ACCESSORIES
The following accessories must be installed as applicable:
- Apply the two levellers underneath the equipment at the front by screwing them
into the two holes;
- Apply stainless steel feet or rollers to the holes in the lower part of the unit using
an Allen key;
- Place the handle on the rear and the door of the appliance by tightening the
screws in the holes.
- Before placing the shelves, apply the brackets provided inside the equipment to
the respective shelf rails.
- Place the recipient provided inside the equipment under it, according to the
following image.
Ensure that the drain pipe is directed towards the recipient.
33