Publicidad
Idiomas disponibles
Idiomas disponibles
Usingthe surface units.
9e.com
! iiiii)
!J! ii!i i5
Radiant Surface Units
The control for the radiant surface unit
con be set ongwhere between LO and HI
for on unlimited number of heat settings.
With the infinite switch the coil cgcles
on and off to maintain gour selected
control setting.
To bring liquids to o boil foster, use o lid to
cover the pon.
HOT
ON
The control knob must be pushed down
and turned from the OFF position. When
the control knobs ore in ong position other
Besureyou turn the control knobto OFF
than off,theg mog be turned without
whenyou finish cooking,
pushing down.
Be sure gou turn the control knob off
when gou finish cooking. You will feel
o click at the OFF position.
The surface unit ON indicator light will glow
when any surface unit is on.
NOTE:Thesurface unit ON indicator light
may glow between the surface control
settings of LO and OFF,but there is no
power to the surface units.
Cooktop temperatures increase with
the number of surface units that ore on.
With 3 or 4 units turned on, surface
temperatures ore high so be careful
when touching the cooktop.
The HOTSURFACEindicator lights will
glow when ang radiant element is turned
on, and will remain on until the surface is
cooled to opproximotelg 150°R
NOTE:
Hot Surface Indicator Lights come on
instantly and stay on even after the
surface unit is turned off.
The_l g low brightl_luntil the unit is cooled
to opproximotel_1150°K
Besure to turn the control knob off
when you finish cooking.
i ¸¸
cE_
i¸¸ .........
.......!
Nevercookdirectly onthe glass.
Always use cookware.
Alwaysplacethe panin the center
of the surfaceunit you are cookingon.
About the radiant
surface units...
The radiant cooktop features heating units
beneath o smooth gloss surface.
NOTE:A slight odor is normal when o new
cooktop is used for the first time. It is
caused by the heating of new parts and
insulating materials and will disappear in
o short time.
NOTE:On models with light colored glass
cooktops, it is normal for the cooking zones
to change color when hot or cooling down.
Thisis temporary and will disappear as the
glass cools to room temperature.
The surface unit will cucle on and offto
maintain your selected control setting.
It is safe to place hot cookwore from the
oven or surface on the glass surface when
the surface is cool.
Evenafter the surface units ore turned
off, the gloss cooktop retains enough
heat to continue cooking. To ovoid over-
cooking, remove pans from the surface
units when the food is cooked. Avoid
placing anything on the surface unit until
it has cooled completely.
iiiilDiiii
Water stains (mineraldeposits)are
removable using the cleaning cream
or full strength white vinegar,
Use of window cleanerma_l leave
an iridescent film on the cooktop.
Thecleaning cream will remove this
discoloration.
Don't store heav_litems above the
cooktop. If they drop onto the cooktop,
they con cause damage.
Do not use thesurfaceas a cutting board.
Do not slidecookwareacrossthe
cooktopbecause it can scratchthe glass.
The glassis scratch-resistant, n ot
scratchproof.
Publicidad
