GE 21 Manual Del Propietario E Instalación página 11

About the automaticicemaker,
vvww.GEAppliances.com
A newly-installed refrigerator may take 12 to 24 hours to begin making ice.
Power
Automatic/cemaker
If ice is not used fl'equently, old ice cubes
Switch will become cloud}, taste stale and shrh_k.
Icemaker
If ice cubes get stuck in the icemakel, tile
green power light will blink. To correct this,
Power L ght !fArm
set the power switch to 0 (Of/) and remove
the cubes. Set the power switch to / {On)to
restart the icemaker. _Mter the icemake_ has
been turned on again, the_e will be a delay
of about 45 minutes beik)re the icemaker
resumes operation.
NOTE"/n homes with lower-than-averagewater
pressure,you may hear the/?emaker cycb mult))b
tbTeswhenmakbg onebatchof ira
Pull the upper freezer shelf straight
out to access the icemaker. Always
be sure to replace the shelf. The
shelf can be used for storage.
The icemaker will produce seven cubes
per cycle---appro_mately 100-130 cubes
in a 24-hem" period, depending on fl'eezer
COlllpalq_l//ent telllpel'attlIe, rOOl/l
temperature, number of door openings
and other use conditions.
If the refligerator is operated betbre the
water c(mnection is made to the icemake_;
set the power switch in the 0 (o_)position.
When the re/iigerator has been c(mnected
to the water supply; set the l)O_,_er switch to
the / (on) position.
The icemaker will fill with _ater _d_en it
cools to 15°ff (-10° C). A newl}qnstalled
beginref]igerat°r ma, tal<emaldng ice cubes.12 to 24 houls to
Throw away tile filst _bw batches (>iice to
allow the water line to clear
Be sure nothing interibres with the s*_eep
of the tbeler arm,
When the bin fills to the level (>f" the feeler
arm, the icemaker will stop producing ice,
It is nomml ior se\ end cubes to be joined
togethel:
//i !i
Ice Storage Drawer
Toaccess ice, pull the drawer forward.
To remove the drawer, pull it straight out and
lift it past the stop location.
11