GE 21 Manual Del Propietario E Instalación página 5

About the temperaturecontrols,
vvvvw.GEAppliances.com
I
I
The temperature controls are preset in the factory at 5 for both the
refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust controls,
allow 24 hours for the refrigerator to reach the temperature you
have set.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage, and
operating conditions and may require more than one adjustment.
NOTE: Therefrigerator is shipped with protective film covering the
temperature contre/s. /f this film was not removed during installation,
remove it now.
Performance Air Flow System
The Pet-fi)nnance Air How System is designed to ma_mize temi)erature control in the refrigerator and
fl'eezer comi)artments. This tmique special fbattu'e consists of the Air Tower along the top and back walls of
the refl_igerator and the Air Ttmnel on the bottom portion of the fl'eezer rear wall. Plating ti_od in fl'ont of
the lou\'ets on these components will not affect i)et-fk)nnance. _Mthough the Air Tower and the Air Ttmnel
can be removed, doing so will aftect temperattu'e perfbm/ance. (For remo_:fl instructions, on-line, 24 hotu_
a da); contact us at _vw.GEAl)pliances.com or call 800.GE.(:ARES. In Canada, contact us at
w_v,geappliances,ca or call 1,800,361,3400,)