GE 21 Manual Del Propietario E Instalación página 18

Insertingthe doorpanels.
Read these instructions completely and carefully.
0 Loosen the Top Trim on the Freezer and Refrigerator Doors.
Using a T-20 Torx (lrke_; loosen the two scre_s
attaching the Top Trim about l / 4" (6
IllI//).
@
Insert the Freezer Panel and Refrigerator Panel
I,ifl the Top Trim up 1/4" (6 ram) and carefully Ifyour model has a dispenser and/or a
push the fl'eezer panel in tmtil it slides into the slot Refreshment Center; this step only applies
behind the door handle. Push the filler panel to the top panels.
(required with some door panels) in behind the
decorator panel. Repeat fin" reii_igerator panel.
@
Insert the Bottom Panel (for models with a dispenser and/or a Refreshment Center).
Careflflly push the panel in tmtil it slides into the
slot behind the door handle. Push the filler panel
(required with some door panels) in behind the
decorator panel.
Hand tighten the two screws on the Top Trim.
Cut-Out
Side Trim
/8