KSIX AMBIGLOW BXLEDTV03 Manual De Usuario página 2

To capture the color properly, the sensor needs to be placed
on top of your TV. It is specifically designed to aim towards
the screen without interfering with what is being displayed
on your TV, so it does not block anything you are watching.
The sensor works with a simple clamp system. Pull from the
bottom part of the sensor until it adapts to the width of your
TV. Then, simply place it on top of your TV and the clamp will
fix it.
Safety note: Do not cover the product once it is installed and
connected to the power. Do not install the product in a wet
place.
Download the app
The AmbiGlow compatible app is called Tuya Smart. There
are two ways to download it:
-Tap here to download the Tuya Smart app from Google Play
or App Store.
-You can also download the app directly by typing "Tuya
Smart" in the Google Play or App Store search engine.
Pairing iOS / Android devices
To complete the pairing, the strip must be powered on.
1. First, and most importantly, make sure to have your
smartphone's Bluetooth and WiFi enabled.
2. Set the device in pairing mode. To do so, press the "On/Off"
button on the control unit for 5 seconds. The strips will start
flashing.
3. Access the Tuya
Smart app. Once
inside, tap on add
device.