Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE
1.Plug the air fryer into the power supply, the buzzer rings once and the power button (1)
will be displayed on the screen showing the air fryer is now in Stand by mode.
2.Press the power button (1) to start the machine, the LED screen will be on, and the de-
fault menu "French fries" (7) will be displayed. If the control panel is not operated within 1
min after starting up, the buzzer will sound three times.
3. To select other menus touch the corresponding icon which will be highlighted, then
press the start/stop button (6) to start cooking. Press again start/stop button (6) to pause
the process. In pause mode the fan will be working for about 70 seconds and the time dis-
play (4) and Start/stop button (6) will flash.
4. Before start any menu you always have the possibility of adjusting the preset tempera-
ture and time by touching the regulation buttons (2) and (5).
5.Each time you press temperature regulation button (2) is +/- 5ºC and the buzzer will ring
once each time. Long press (2.5s) the temperature can be increased or decreased quickly.
6. Each time you press time regulation button (5) is +/- 1min and the buzzer will ring once
each time. Long press (2.5s) the time can be increased or decreased quickly.
7. Press the light Switch (11) to turn the light on or off. It will be turned off automatically
after 60s. The light icon is highlighted when the light is on.
8. When the program is working, the orange ring light of Start/stop button (6) is steady
on. When paused, the orange ring light flashes at a frequency of 0.5S. In pause mode, time
display is flashing and the buzzer will remind the user three times every 1min until the icon
is pressed again to continue working.
9. During the program operation, when the oven door is opened the light comes on and
the icon flashes synchronously. The time display screen (4) shows OPEN and flashes. Only
when the door is closed, the light goes out and continues to work automatically.
10. Once the time set has finished the device will beep for 3 times indicating the menu has
finished.
ROSTISSERIE
How to use the "Rostisserie" function:
1. Place the appliance on a flat, stable surface.
2. Make sure that the removable crumb tray (6) is placed under the lower heating elements
when using the appliance.
3. Place a rostisserie fork (2) on the end of the stick (1) with the fork facing the centre, then
tighten the screw of the rostisserie fork, and fix the rostisserie fork with the stick.
4. Fork the food from the other end of the stick (1) until it clicks into place with the fork.
5. Place the other fork (2) on the other end of the roasting stick (1) with the fork facing the
18
Publicidad
