GE 21 Manual Del Propietario Y Instalación página 22

Installation Instructions
INSTALLING THE REFRIGERATOR
(cont.)
161REMOVE THE FRESH FOOD
DOOR HANDLE
(For placement in the installation location or
reversal of the handles - on some models)
stainless steel (on some models}:
@ REMOVING THEDOOR
HANDLE:Loosenthe
set screws with the
3/32 Allen wrench
and remove the
handle. NOTE:For
Double Door models
follow the same
procedure on the
opposite door.
Badge
Mounting /
Fasteners
(appearance may vary)
Plastic handle (on some models}:
0 REMOVING THEDOORHANDLE: D epressthe tab on
the underside of the handle and slide the handle up
and off of the mounting fasteners.
(_ REVERSING T HE DOORHANDLE(on some models):
• Remove
the handle
mounting
fasteners with a -.
1/4 Allen f
wrench and
transfer the Badge
handle mounting
fasteners to the
right side.
• Removethe logo
badge.
• Removeand Mounting
transfer the
Fasteners
plug button to
the left side of (appearance
may
vary)
the fresh food
door. NOTE:Use a flat plastic edge to prevent
damaging the door. Removeany adhesive on the
door with a mild detergent. Removethe paper
covering on the adhesive backing on the logo badge
prior to carefully attaching the badge to the door.
rTi REMOVE THE FREEZER DOOR HANDLE
Stainless steel and plastic handles:
@ Loosenthe set screws located on the underside of
the handle with the 1/8 Allen wrench and remove
the handle.
NOTE:If the handle mounting fasteners need to be
tightened or removed use a i/4 Allen wrench.
22