GE 21 Manual Del Propietario Y Instalación página 30

Installation Instructions
REMOVINGTHE DOORS
(Double Door Refrigerator Models only)
IMPORTANT NOTES
NOTE: Door swing is not reversible.
• Read the instructions all the way through before
starting.
• Handle ports carefully to ovoid scratching point.
• Set screws down by their related ports to ovoid
using them in the wrong places.
• Provide a non-scratching work surface for the
doors.
IMPORTANT: Once you begin, do not move the
cabinet.
These instructions are for removing the doors.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy
compartment.
TOOLS YOU WILL NEED
AdjustableWrench
3/8 and 10 mmSocket
Ratchet/Driver
MaskingTape
Thin-bladeScrewdriver
@
PhillipsScrewdriver
ITl REMOVE THE
REFRIGERATOR DOORS
[_] Tape the doors shut with masking tape.
(for water dispenser models)
r_ start with right-hand door first: Remove the
screw securing the center hinge cover, lift the
hinge cover and place to the side on top of the
refrigerator.
Remove
(for water dispenser models)
r_ Remove water coupling and power coupling.
Water Coupling
Remove the metal spring clip. _ _"'-.]b_
Use a screwdriver to push the --(,_%b----_
red plastic locking clip down _- ) I
and off "_ I I
Power Coupling
Black mark flush
with collar
assembly
Pull apart power
coupling to
disconnect
3O