Descargar Imprimir esta página

UFESA CC2000P Manual De Instrucciones página 23

Calefactor de pared
Ocultar thumbs Ver también para CC2000P:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
-The"TIME/OFF"can not be less than"TIME/ON";
-When the"TIME/ON" is the same as"TIME/OFF", the time period enter into standby mode;
Set open-window detection(ONLY by remote control):
1). Press "
" the product enter into working status. Heating for a moment untill stable.
2). Press "
" by remote control,light " / ºC" will on; The temperature display "23" by
default. Press "
once the ambient temperature drops 5-10 ºC within 10 minutes, then the product will stop
working within 30 minutes and enter into stand by mode. Then press "
product. Press "
and the product will resume to previous working mode. Below is an example to set 23 ºC
during open-window detection.See below :F
3).When turn on at the same time for both open-window detection and weekly program,
during the OFF period of weekly program, the product doesn't work. During the wor-
king status of weekly program, the temperature is subject to the setting temperature of
open-window detection. See below : G
Information requirements for electric local space heaters
MODEL IDENTIFIER(S): CC2000P
Item
Heat output
Nominal heat
output
Minimum heat
output
(indicative)
Maximum
continuous
heat output
Auxiliary electricity
consumption
At nominal heat
output
At minimum heat
output
In standby mode
/
" to set target temperature. During open-window detection mode,
" again to turn off the open-window detection, the light " " will go off
Symbol
Value
P nom
2,0
P min
0
P max,c
2,0
el max
0
el min
0
el SB
0.000
Unit
Item
Type of heat input, for electric
storage local space heaters only
Manual heat charge control,
KW
with integrated thermostat
Manual heat charge control
KW
with room and/or outdoor
temperature feedback
Electronic heat charge control
KW
with room and/or outdoor
temperature feedback
Fan assisted heat output
Type of heat output/room
KW
temperature control (select one)
Single stage heat output and
KW
no room temperature control
Two or more manual stages,
KW
no room temperature control
" to turn on the
Unit
No
No
No
No
No
No
23

Publicidad

loading