Publicidad
• Inserting bobbin
[] Place a bobbin in the bobbin case, making sure the
thread feeds clockwise from the bobbin.
[] Draw the thread through the slot of the case.
[]
S
[]
[] Continue to draw the thread under the tension spring (_
and through the opening.
Pull out about 4" (10 cm) of thread.
(_ Tension spring
S
[]
J
[] Holding the latch open, position the bobbin case into the
shuttle, and then release the latch.
S
[]
/
/
\
[_The
case should lock into the place when the latch is
released.
[]
22
Publicidad
