Teka DPL ISLA 85 Serie Manual De Instrucciones página 20

Instructions for use
You can activate or deactivate the cooker
hood by operating the functions shown in the
diagram.
Switch on the extractor fan a few minutes before
you start to cook in order to ensure that a steady
air flow has been established before fumes
appear.
Allow the extractor fan to run for several minutes
after you have finished cooking (between 3 to 5
minutes) in order to expel all the grease from the
outlet duct. This prevents the return of grease,
smoke and smells.
Increase fan speed
Reduce fan speed
Display
Light
Timer
Program the working time
1)Switch on the cooker hood and choose the
required aspiration speed.
2)Push 'Timer'.
3)Select the required programming time from 1
to 99 minutes by using the buttons '+' and '-'.
4)The display will alternately show the clock and
the remaining programming time.The maximum
speed 'H' can only be selected manually and
will be changed automatically to the second
speed level after approximately 10 minutes.
Filter saturation indicator "F"
•When the sign 'Saturation of the filters' is on, the
filters should be cleaned.
•After cleaning the filters, simultaneously push
"+" and "-" for at least 3 seconds whereupon the
sign will be switched off.
Cleaning the metal filters
During cleaning and maintenance work, make
sure the safety instructions are complied with.
Cleaning and maintenance
•If your kitchen hood is made of stainless steel,
use proprietary cleaners mentioned in the
product instructions.
•If your kitchen hood is painted, use lukewarm
water and a neutral soap.
•Never use metallic scourers, nor abrasive or
corrosive products.
•Dry the kitchen hood using a cloth that does not
produce fibres.
•Do not use vapour cleaners
Cleaning the hood body
•To remove the filters from their fittings, press
lightly on the locks and then pull them off.
•The metal filters can be cleaned by soaking
them in hot water with neutral detergent until the
fat dissolves and then rinsing them under the tap
or using special anti-grease products. They can
also be washed in a dishwasher. In this case, it
is advisable to stack them vertically to avoid food
residues to stick to them.
•Cleaning in a dishwasher may damage the
metallic surface (blackening it), although this will
not affect its fat retention capacity.
•Once clean, leave them to dry off and then fit
them onto the kitchen hood.
Lights
For changing the light bulbs please contact the
manufacturer's nearest Technical Service.
Lamp code: 81483104