Publicidad
Idiomas disponibles
Idiomas disponibles
2. Connect the Supply Hoses
Ø 3" (76 mm) Min
Check Valve
(If Provided)
CAUTION: Risk of restricted water flow and product damage. The supply
hoses must not be taut, kinked, or twisted. If the supply hoses must be coiled,
maintain an inside diameter of 3" (76 mm).
If provided, install the check valves between the supply hoses and the supply
stops.
Connect and tighten the supply hoses to the supply stops.
Place a bucket under the outlet hose.
Turn ON the water supplies.
Flush hot and cold water for 1 minute to remove any debris.
1433564-2-D
Outlet Tube
6
Kohler Co.
Publicidad
