TWINCA ES-500 Manual De Operaciones página 41

Machine structure and use
The machine is primarily made up of three parts: dump bed, scissors and chassis.
Proper use of the machine:
• The machine may be used for transporting soil, granules, stones, concrete, wood and similar materials.
• The machine must always be stable and level during loading and unloading.
• The dump bed and scissors of the machine must be down before driving.
• The operator has full responsibility and must always be at the control handle.
Improper use of the machine:
• The machine must NOT be used for transporting people or animals.
• The machine must NOT be used for driving where there is an incline of more than 10 degrees, or sideways
driving on a incline of more than 5 degrees.
• The machine must NOT be used on soft and uneven ground when loading and unloading.
• The machine must NOT be driving with scissors or dump bed up.
• The machine must NOT be used when driving on inclines where the operator is at the lowest point of
the incline.
• The machine must NOT be used for pushing or pulling.
• The machine must NOT be used in an explosive atmosphere. The machine is NOT ATEX approved.
• The machine must NOT be used in wet areas where the amount of water exceeds 1x1 meter and 5 centimeters
in depth.
• The dump bed must NOT be emptied manually of material when the load and scissors are up.
• The machine must NOT be used in weather with a wind speed of more than 12.5 m/s, which corresponds
to wind speed 6 on the Beaufort scale.
37 TWINCAES5008001-EN